Инвертор GEFRAN 10297 ADV200 LC с жидкостным охлаждением, векторный привод (id10856)

Инвертор GEFRAN 10297 ADV200 LC с жидкостным охлаждением, векторный привод от GEFRAN — продукция Приводы, которая гарантирует эффективность и устойчивость в работе. Компания Siderus предлагает продукцию, подходящую для различных отраслей и сфер применения

Почему выбирают нас:

• Минимальные сроки доставки за счет прямых поставок
• Поставляем исключительно оригинальные изделия
• Конкурентные цены и прозрачные условия работы
• Быстрая обработка заказа и отгрузка по всей России
• Консультации и техническая поддержка на всех этапах

☎ Консультации и заказы по телефону 8 (800) 777-47-07

Характеристики - GEFRAN 10297 ADV200 LC Liquid cooled field-oriented vector inverter

The ADV200-LC series is used in applications that demand robustness, long life, and maximum reliability. Liquid cooling systems of electrical and mechanical units, widely used in plastic processing equipment, significantly reduces the size of the electrical drive. Thanks to a very robust dissipation system, the ADV200-LC series supports the already available air-cooled line and integrates with great flexibility in existing systems. Functions: Self-tuning rotational and stand still of speed-current-flux regulators and motor data identification Torque control Simplified Start-up menu Instantaneous Overload up to 180% Motor, Drive and Braking resistor I2t thermal protection Multispeed function (16 programmable preset) 4 independent programmable Multi-ramp with jerks Anti-condensation function Motorpotentiometer function Flying restart function Droop function Double motor parameters setting PID block function (application pre-charged) Mains loss detection managed through controlled stop and/or energy optimization Variable switching frequency CT an VT operating mode Built-in humidity sensor Management of external solenoid (if present) to control flow of cooling liquid for drive and motor Advanced programming via MDPLC tool (IEC 61131-3 standard environment) Memory Keypad with 5 parameters set. Options: I/O expansion cards, configurable according to the customer's machine needs Expansion cards for the management of auxiliary encoders Field-bus interface cards: ProfiBus , CANopen, DeviceNet, GDNet, EtherCAT, EtherNet/IP, ProfiNet Dedicated EMC filters (in compliance with CEE - EN61800-3:2004) Braking resistors (standardized for the whole line) Output chokes (standardized for the whole line) Bracket kit for mounting rear panel heat sink (standard and with IP54 protection rating) Rapid connectors kit Extension pipe with swivel connections.
Field-oriented vector inverter, from 30kW up to 400kW * Mains supply: 3 x 380&hellip,480Vca, 50/60Hz * Motor ratings from 30kW (40Hp) to 400kW (500Hp) * Certifications: CE, UL, cUL Features:

• Motor type: asynchronous and synchronous motors
• Regulation control modes: FOC with Speed feedback, FOC open loop, V/F
• Max Output frequency 500Hz
• DC Choke integrated up to 200kW
• EMC Filter integrated
• Dynamic Braking Module integrated (up to 90kW)
• Optional integrated braking resistor (up to 55kW)
• Overload according with IEC146 Class 1 and Class 2
• Heavy duty and Light duty overload management
• Up to 3 options on board
• Safety Stop card in accordance with EN 954-1 (Cat.3) PL e
• Multilanguage programming software (5 languages)
• Advanced PLC according to the IEC61131-3 Standard
• Alphanumeric programming keypad
• 2 Bipolar Analogue Inputs (Voltage/Current/PTC-KTY input)
• 2 Bipolar Analogue Outputs (1: Voltage/Current, 1: Voltage)
• 6 Digital Inputs (PNP / NPN)
• 2 Digital Outputs (PNP / NPN)
• 2 Relay Outputs, single contact
• RS485 Serial Line (Modbus RTU protocol)
• Interfacing with the more common field bus: ProfiBus, CANopen, DeviceNet, EtherNet real.time GDNet, EtherCAT, EtherNet/IP, ProfiNet
• IP00 protection degree as standard