CES-AR-CR2-CH-L20-109052 (Order no. 109052) (id175411)

CES-AR-CR2-CH-L20-109052 (Order no. 109052) от Euchner — продукция Транспондерные предохранительные выключатели без защитной блокировки, которая гарантирует эффективность и устойчивость в работе. Компания Siderus предлагает продукцию, подходящую для различных отраслей и сфер применения

Что получает клиент:

• Сертифицированная продукция без подделок
• Полное сопровождение: от консультации до запуска
• Честная стоимость без скрытых платежей
• Оперативная обработка заявок и доставка по РФ
• Минимальные сроки доставки за счет прямых поставок

☎ Для консультации и заказа: 8 (800) 777-47-07

• Safety switch with integrated evaluation electronics
• Up to 20 switches in series
• Short circuit monitoring
• 2 safety outputs (semiconductor outputs)
• Door hinge right
• Category 4/PL e according to EN ISO 13849-1
• Connection cable PUR, 20 m, flying lead, 8-core
• Multicode
• Two safety screws M4x14 included

Short circuit monitoring The switch generates its own clock signal on the output cables OA/OB. Pay attention to this aspect when connecting to control systems and relays. Multicode evaluation Every suitable actuator is detected by the switch. Category according to EN 13849-1 Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:

• Category 4/PL e according to EN 13849-1

Important: To achieve the stated category in accordance with EN ISO 13849-1, both safety outputs (OA and OB) must be evaluated. LED indicator

STATE	Status LED
DIA	Diagnostics LED

Additional connections

OUT	Monitoring output (semiconductor)
RST	Reset input

Approach directions Typical operating distance (Actuator CES-A-BLN... in conjunction with safety switch CES-AR-C.2-... in case of mounting on plastic) For a side approach direction for the actuator and safety switch, a minimum distance of s = 6 mm must be maintained so that the operating distance of the side lobes is not entered. Attention: The operating distance may vary depending on the background material and installation situation. Terminal assignment

Designation	Function	Conductor coloring of connection cable
IB	Enable input for channel 2	WH
UB	Power supply, DC 24 V	BN
OA	Safety output, channel 1	GN
OB	Safety output, channel 2	YE
OUT	Monitoring output	GY
IA	Enable input for channel 1	PK
0V	Ground, DC 0 V	BU
RST	Reset input	RD

Housing material	Plastic, PBT
Weight
Net	0,7 kg
Ambient temperature
Cable static	-30 ... 65 °C
Cable dynamic	-25 ... 65 °C
Degree of protection	IP67, IP69K
Resilience to vibration	In acc. with EN IEC 60947-5-2
Mounting method	Surface mounting on metal
Mounting distance
Between 2 switches or 2 actuators	min.120 mm
Installation orientation	Any
Tightening torque
Fixing screws	max.1 Nm
Ready delay	10 s
Switching frequency	max.1 Hz
Connection	connection cable PUR, length 20m
Bending radius
Dynamic	10 x cable diameter
static	5 x cable diameter

Electrical connection ratings

Operating voltage DC
UB	24 V DC 15% ... 15% Regulated, residual ripple < 5 %
Current consumption	max.50 mA
Fusing
External (operating voltage)	0,25 ... 8 A
Rated insulation voltage Ui	75 V
Rated impulse withstand voltage Uimp	max.1,5 kV
EMC protection requirements	In acc. with EN IEC 60947-5-3
Degree of contamination (external, according to EN 60947-1)	3
Switch-on time
Safety outputs	max.400 ms
Safety class	III
Risk time according to EN 60947-5-3
Delay per device	5 ms
Single device	max.260 ms
	Monitoring output OUT
Type of output	p-switching, short circuit-proof
Switching current	max.50 mA
Output voltage	0,8 x UB ... UB V DC
	Safety outputs OA/OB
Test pulses	max.1 ms
Test-pulse interval	min.140 ms
Type of output	Semiconductor outputs, p-switching, short circuit-proof
Switching current
per safety output	1 ... 200 mA
Output voltage
HIGH U(OA) / U(OB)	UB-1,5V ... UB V DC
LOW U(OA) / U(OB)	0 ... 1 V DC
Utilization category according to EN 60947-5-2
DC-13	24V 200mA
Rated conditional short-circuit current	100 A
Off-state current Ir	max.0,25 mA
Discrepancy time	max.10 ms

Work area

Repeat accuracy R

? 10

Other

For the approval according to UL the following applies

Operation only with UL class 2 power supply, or equivalent measures

Reliability values according to EN ISO 13849-1

	Monitoring of the safety guard position
Category	4
Performance Level	PL e
PFHD	1.9 x 10-9
Mission time	20

In combination with Actuator CES-A-BDN-06-104730Operating distance

Switch-on distance	19 mm
Assured switch-off distance Sar
In x/z direction	max.40 mm
In y direction	max.60 mm
Assured operating distance Sao	min.14 mm
Switching hysteresis	min.1 mm

In combination with Actuator CES-A-BLN-R2-100776, CES-A-BLN-U2-103450, CES-A-BLN-L2-104510, CES-A-BLN-U2-112710Operating distance

Switch-on distance	15 mm
Assured switch-off distance Sar
In y direction	max.60 mm
In x/z direction	max.40 mm
Assured operating distance Sao	min.10 mm
Switching hysteresis	min.1 mm