MGB-L1H-APA-L-114238 (Order no. 114238) (id174078)

MGB-L1H-APA-L-114238 (Order no. 114238) от Euchner — оригинальная продукция Многофункциональный дверной модуль MGB, обеспечивающая стабильную работу и долговечность. Компания Siderus обеспечивает поставки оборудования, соответствующего международным стандартам

Преимущества работы с нами:

• Прямые поставки и оптимальные сроки доставки
• Официальные поставки оригинальной техники
• Сопровождение специалистов от подбора до внедрения
• Честная стоимость без скрытых платежей
• Оперативная обработка заявок и доставка по РФ

☎ Консультации и заказы по телефону 8 (800) 777-47-07

• Guard locking with guard lock monitoring
• 3 pushbuttons (illuminated, wh, ye, bu and printed)
• With plug connector RC18
• With plug connector M12 for enabling switch
• Unicode

Guard locking type

MGB-L1...

The locking arm is held in the locked position by spring force and is unlocked by solenoid force (closed-circuit current principle, mechanically locked).

Door hinge A mechanical door stop is permanently integrated into the evaluation module of the MGB. A marking on the stop makes adjustment easier. LED indicator The LED indicator indicates all important system and status information. Monitoring outputs

OT	Bolt tongue inserted in the evaluation module
OI	Diagnostics, there is a fault

Pushbutton

S2	1 NO contact, white, illuminated and printed
S3	1 NO contact, yellow, illuminated and printed
S4	1 NO contact, blue, illuminated and printed

Connection for enabling switch The device has an M12 plug connector for the direct connection of an enabling switch (e.g. ZSA, order no.: 110560). Dimension drawing Dimension drawing Dimension drawing Plug connector RC18 MGB: The MGB-System in use MGB: MGB Impact test MGB: Mounting left door, with escape release Mounting left door, without escape release Mounting right door, without escape release MGB: Changing series wiring (AR) to single wiring (AP) MGB: Deactivating guard lock monitor MGB: Activating guard lock monitor MGB: Activating release monitoring MGB: Change color-lens push button Dimension drawingDimension drawingDimension drawingPlug connector RC18 Technical data Locking module MGB-L1-APA-AA6A1-S5-L-114237 (Order no. 114237) Mechanical values and environment

Housing material	Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Weight
Net	0,75 kg
Ambient temperature
At UB = 24V DC	-20 ... 55 °C
Degree of protection	IP65
Mechanical life	1 x 106
In case of use as door stop, and 1 Joule impact energy	0,1 x 106
Installation orientation	Door hinge DIN left
Switching frequency	0,25 Hz
Connection
	Plug connector SFF5
	Plug connector RC18
Guard locking principle	Closed-circuit current principle
Locking force FZh	2000 N

Electrical connection ratings

Utilization category according to EN 60947-5-2
DC-13	24V 200mA
Rated insulation voltage Ui	30 V
Rated impulse withstand voltage Uimp	1,5 kV
Degree of contamination (external, according to EN 60947-1)	3
Safety class	III
Discrepancy time
Between FO1A and FO1B	max.10 ms
Risk time according to EN 60947-5-3	max.350 ms
Transponder coding	Unicode
	Power supply UB
Operating voltage DC
UB	24 V DC -15% ... 10%
Current consumption
IUB	max.80 mA
	Power supply UA
Operating voltage DC
UA	24 V DC -15% ... 10%
Current consumption
IUA	max.375 mA
	Safety outputs FO1A, FO1B
Test pulses	max.0,3 ms
Test-pulse interval	min.100 ms
Type of output	Semiconductor outputs, p-switching, short circuit-proof
Output voltage
UFO1A /UFO1B HIGH	UB-2V ... UB V DC
UFO1A /UFO1B LOW	0 ... 1 V DC
Output current
Per safety output FO1A / FO1B	1 ... 200 mA
	Monitoring outputs OD, OT, OL, OI
Type of output	Semiconductor outputs, p-switching, short circuit-proof
Output voltage	UA-2V ... UA V DC
Output current	max.50 mA
	Controls and indicators
Switching voltage	UA V
Switching current	1 ... 10 mA
Breaking capacity	max.0,25 W
Power supply LED	24 V DC
	Solenoid control input IMP1, IMP2, IMM
Test pulses	max.5 ms
Test-pulse interval	min.100 ms

Other

Product version number

V3.0.3

Reliability values according to EN ISO 13849-1

	Monitoring of guard locking and the safety guard position
Category	4
Performance Level	PL e
PFHD	3.7 x 10-9
	Control of the guard locking
Category	4
Performance Level	PL e
PFHD	2.8 x 10-9
Mission time	20 y

Handle module MGB-H-AA1A3-L-111158 (Order no. 111158) Mechanical values and environment

Housing material	Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Weight
Net	1,00 kg
Ambient temperature	-20 ... 55 °C
Degree of protection	IP65
Installation orientation	Door hinge DIN left

Other

Additional feature	With automatic lockout mechanism
Product version number	V3.0.0

Components 114237 Locking module MGB-L1-APA-AA6A1-S5-L-114237

• Guard locking with guard lock monitoring
• 3 pushbuttons (illuminated, wh, ye, bu and printed)
• With plug connector RC18
• With plug connector M12 for enabling switch
• Unicode

111158 Handle module MGB-H-AA1A3-L-111158

• Intelligent bolt tongue
• Fold-out lockout mechanism
• Second automatically extending lockout mechanism
• Door handle