MGB-L0C-ARA-L-110260 (Order no. 110260) (id174045)

MGB-L0C-ARA-L-110260 (Order no. 110260) от Euchner — промышленное решение Многофункциональный дверной модуль MGB, разработанное с учетом требований эксплуатации. Компания Siderus помогает подобрать оптимальные решения под технические требования заказчиков

Наши преимущества:

• Прозрачные условия сотрудничества
• Минимальные сроки доставки за счет прямых поставок
• Быстрая обработка заказа и отгрузка по всей России
• Консультации и техническая поддержка на всех этапах
• Гарантированно подлинное оборудование напрямую от бренда

☎ Консультации и заказы по телефону 8 (800) 777-47-07

• Locking (without guard locking)
• Can be connected in series with other AR devices (e.g. CES-AR and CET-AR)
• With control module MGB-C
• Emergency stop according to ISO 13850
• 3 pushbuttons (illuminated, wh, wh, bu)
• 2 indicators (illuminated, gn, rd)
• Incl. adhesive labels
• With plug connector RC26
• Unicode

Guard locking type

MGB-L0...

The bolt tongue in the handle module is moved into and out of the interlocking module by actuating the door handle. The door arm is not locked in the locked position.

Door hinge A mechanical door stop is permanently integrated into the evaluation module of the MGB. A marking on the stop makes adjustment easier. LED indicator The LED indicator indicates all important system and status information. Monitoring outputs

OD	ON when the door is closed
OT	Bolt tongue inserted in the evaluation module
OI	Diagnostics, there is a fault

Emergency stop device

S1	2 positively driven NC contacts and 1 NO contact (e.g. monitoring contact), emergency stop with turn-to-reset, not illuminated

Pushbutton

S10	1 NO contact, white, illuminated
S11	1 NO contact, white, illuminated
S15	1 NO contact, blue, illuminated

Indicators

H12	LED, green
H14	LED, red

Adhesive labels Devices with adhesive labels have pre-formed recesses. The adhesive labels enclosed (standard size 12.5 x 27 mm) can be affixed in these recesses. Dimension drawing Dimension drawing Plug connector RC26 MGB: The MGB-System in use MGB: MGB Impact test MGB: Mounting left door, with escape release Mounting left door, without escape release Mounting right door, without escape release MGB: Changing single wiring (AP) to series wiring (AR) MGB: Deactivating guard lock monitor MGB: Activating guard lock monitor MGB: Activating release monitoring MGB: Change color-lens push button Dimension drawingDimension drawingPlug connector RC26 Technical dataApprovals Mechanical values and environment

Housing material	Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Weight
Net	1,4 kg
Ambient temperature
At UB = 24V DC	-20 ... 55 °C
Degree of protection	IP65
Mechanical life	1 x 106
In case of use as door stop, and 1 Joule impact energy	0,1 x 106
Installation orientation	Door hinge DIN left
Switching frequency	0,25 Hz
Connection	Plug connector RC26

Electrical connection ratings

Utilization category according to EN 60947-5-2
DC-13	24V 200mA
Rated insulation voltage Ui	30 V
Rated impulse withstand voltage Uimp	1,5 kV
Degree of contamination (external, according to EN 60947-1)	3
Safety class	III
Discrepancy time
Between FO1A and FO1B	max.10 ms
Risk time according to EN 60947-5-3	max.350 ms
Transponder coding	Unicode
	Power supply UB
Operating voltage DC
UB	24 V DC -15% ... 10%
Current consumption
IUB	max.80 mA
	Power supply UA
Operating voltage DC
UA	24 V DC -15% ... 10%
Current consumption
IUA	max.10 mA
	Safety outputs FO1A, FO1B
Test pulses	max.1 ms
Test-pulse interval	min.100 ms
Type of output	Semiconductor outputs, p-switching, short circuit-proof
Output voltage
UFO1A /UFO1B LOW	0 ... 1 V DC
UFO1A /UFO1B HIGH	UB-2V ... UB V DC
Output current
Per safety output FO1A / FO1B	1 ... 200 mA
	Monitoring outputs OD, OT, OL, OI
Type of output	Semiconductor outputs, p-switching, short circuit-proof
Output voltage	UA-2V ... UA V DC
Output current	max.50 mA
	Controls and indicators
Switching voltage	UA V
Switching current	1 ... 10 mA
Breaking capacity	max.0,25 W
Power supply LED	24 V DC
	Emergency stop
Switching voltage	5 ... 24 V
Switching current	1 ... 100 mA
Breaking capacity	max.0,25 W
Power supply LED	24 V DC

Controls and indicators

Belegungsschema	L0
Belegungsschema	C2
	Position 10
Ausfuhrung	Illuminated push buttons
Einlegeschild
Extras
Farbe	white
Schaltelement	1NO
	Position 11
Ausfuhrung	Illuminated push buttons
Einlegeschild
Extras
Farbe	white
Schaltelement	1NO
	Position 12
Ausfuhrung	Cover for indicators
Einlegeschild
Extras
Farbe	Green
Schaltelement
	Position 13
Ausfuhrung	Emergency stop
Einlegeschild	Adhesive label D40mm
Extras	With auxiliary contact
Farbe
Schaltelement	2 pos. driven NC + 1NO
	Position 14
Ausfuhrung	Cover for indicators
Einlegeschild
Extras
Farbe	Red
Schaltelement
	Position 15
Ausfuhrung	Illuminated push buttons
Einlegeschild
Extras
Farbe	Blue
Schaltelement	1NO

Other

Product version number	V3.0.0
Slide-in label	5 pc. without marking

Reliability values according to EN ISO 13849-1

	Monitoring of the position of the safety guard
Category	4
Performance Level	PL e
PFHD	3.7 x 10-9
	Emergency stop
B10D
Emergency stop	0,065 x 106
Mission time	20 y